What to consider when designing the timing pulley

At present, there are many kinds of Timing Pulley materials. The materials used in different occasions will be different. Like some machines that require high resistance to corrosion, consumers can buy copper timing pulleys or stainless steel.

In order to improve the corrosion resistance of the synchronous pulley, the company will process it on its surface, which can be galvanized on its surface, oxidized by natural color, and quenched by high-frequency quenching with salt spray.

When designing the Timing Pulley, it is not only the environment in which it is used, but also many aspects to consider. To design the Gear of the synchronous pulley, it is necessary to consider the transmission power of the gear, the transmission ratio, the input and output speed, and the like. This is to be able to determine the modulus and center distance of the timing pulley. If you know this, you can skip this step and proceed directly to the next step.

The following process is the staff to calculate some basic parameters of the gear, you can use the geometric algorithm. After the basic parameters are calculated, the degree of bending of the root and the contact strength of the tooth surface can be checked. If you find that its strength and curvature are not up to standard when you are proofreading, you need to do another calculation.