Noise occurs in S-type and C-type steel roller conveyor chains
Many customers will find noise when using S-type and C-type steel roller Conveyor Chains, and sometimes it is still very loud. I wonder if it is broken. In fact, there are many reasons. Let me talk about the encounter. What should we do about this phenomenon?
The analysis of the causes of noise in S-type and C-type steel roller conveyor chains helps to solve many practical problems. The fact that the sprockets are not coplanar is one of the main reasons for the above situation, which means that the rotating shaft and the sprocket are not on the same horizontal plane. The wear of the chain and sprocket can also cause noise in the use of the chain, which is also unavoidable in use. Finally, there is the quality of the chain itself. If the chain is too tight, the chain is insufficiently lubricated, or the chain pitch is too large, it will affect the use of the chain. The relative solution to this problem is to check the coplanarity of the front and rear axes parallel to the sprocket. Pay attention to strengthen the lubrication and maintenance of the chain during the daily use of the chain.
In fact, as long as you know what caused the abnormal phenomenon, you can solve the problem well, so when we use S-type and C-type steel roller conveyor chains, there must be attention to the noise during the use. What kind of problem appears.